• Call Us: 248.915.5333

Horizontal Balancers

The horizontal hard bearing dynamic balancing machines comes standard with our windows based touch screen operated measuring system. They are available from very small weight capacities up to 50,000kg with different lengths and diameter capabilities. The standard drive system is a belt drive with an optional end drive for the larger diameter and heavier parts.

Horizontal balancers can balance a wide variety of parts. Just about anything that needs to be balanced can be done on a horizontal system. Some of the usual parts include armatures, blowers, fans, pump impellers, turbochargers, centrifuges, spindles, crankshafts, rolls and similar parts.

  • HARD BEARING SUSPENSION
  • PERMENENT CALIBRATION
  • SAFER AND EASIER TO USE
  • BELT DRIVE AND/OR END DRIVE
  • WINDOWS BASED TOUCH SCREEN OPERATED MEASURING SYSTEM
  • ADVANCED ELECTRONIC MEASURING INSTRUMENTATION
  • DURABLE AND RELIABLE SENSORS FOR HIGH ACCURACY AND LINEARITY
  • SPECIALLY DESIGNED HARD BEARING PEDESTALS BUILT FOR DURABILITY AND PERFORMANCE
  • CAST IRON BASE
  • OPTIONAL ON MACHINE CORRECTIONS SYSTEMS

Applicable to small workpieces

Technical data at a glance PHQ-1.6/5 PHQ-1.6A/5A PHQ-16A
Max Mass of Workpiece(kg) 1.6/5 1.6/5 16
Max Diameter of Workpiece (mm) Φ300 Φ300 Φ300
Distance Between Two Support Bearings (mm) 15~500 60~500 60~500
Journal Diameter Scope of Workpiece (mm) Φ 3~40(120°) Φ 3~40 Φ 5~40
Diameter Scope of Driving Belt (mm) Φ20~85 Φ15~150 Φ15~150
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min)  185,335,390,700 (1) ~1470 ~1470
Motor Power (kw) 0.15DC 0.23DC 0.23DC
Min Achievable Residual Unbalance Amount (emar) ≤0.3g· mm/kg ≤0.3g· mm/kg ≤0.3g· mm/kg

Applicable to MEDIUM workpieces

Technical data at a glance PHQ-50 PHQ-160H PHQ-300H PHQ-500H
Max Mass of Workpiece(kg) 50 160 300 500
Max Diameter of Workpiece (mm) Φ700 Φ1000 Φ1220 Φ1500
Distance Between Two Support Bearings (mm) 80~700 130~1270 130~1270 130~1270
Journal Diameter Scope of Workpiece (mm) Φ 3~40(120°) Φ 15~75 (3) Φ 15~75 (3) Φ 15~75 (3)
Diameter Scope of Driving Belt (mm) Φ18~200 Φmax400 Φmax500 Φmax600
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min)  700,1050 (1) 756,1176 (1) 756,1176 (1) 756,1176 (1)
Motor Power (kw) 0.75 (2) 1.5 (2) 1.5 (2) 2.2 (2)
Length of Bed (mm) 1500 1500 1500
Min Achievable Residual Unbalance Amount (emar) ≤0.5g· mm/kg ≤0.5g· mm/kg ≤0.5g· mm/kg ≤0.5g· mm/kg

Applicable to LARGE workpieces

Technical data at a glance PHQ-1000H PHQ-2000H PHQ-3000H PHQ-5000H
Max Mass of Workpiece(kg) 1000 2000 3000 5000
Max Diameter of Workpiece (mm) Φ1600 Φ1800 Φ2100 Φ2400
Distance Between Two Support Bearings (mm) 160~1780 160~1780 160~2280 500~2200
Journal Diameter Scope of Workpiece (mm) Φ 25~120 (4) Φ 25~120 (4) Φ 25~120 (4) Φ40~380
Diameter Scope of Driving Belt (mm) Φmax700 Φmax800 Φmax900 Φ50~1000
Rotational Speed when the Diameter of Driving Belt is 100mm (r/min)  1330,1918 (1) 684,986 (1) 921,1329 (1) 795,1853 (1)
Motor Power (kw) 4 (2) 5.5 (2) 7.5 (2) 15 (2)
Length of Bed (mm) 2000 2000 2500 2500
Min Achievable Residual Unbalance Amount (emar) ≤0.5g· mm/kg ≤0.5g· mm/kg ≤0.5g· mm/kg ≤1g· mm/kg

(1) Stepless speed regulation

(2) Frequency conversion

(3) Can add to 75-180

(4) Can add to 120-240

Applicable to SMALL workpieces

Technical data at a glance PHW-160H PHW-300H PHW-500H
Mass Scope of Workpiece(kg) 160 300 50
Max Diameter of Workpiece (mm) Φ1000 Φ1220 Φ1500
Distance Between Two Support Bearings (mm) Min 60 Min 60 Min 60
Journal Diameter Scope of Workpiece(mm) Φ15~75 (2) Φ15~75 (2) Φ15~75 (2)
Max Distance between Driving Flange and Right Bearing Support (mm) 1500 1500 1500
Rotational Speed of the Main Axis(r/min) 600,1095 (4) 600,1095 (4) 600,1095 (4)
Motor Power (kw) 3 (1) 3 (1) 3 (1)
Torque of Universal Joint Shaft(N·m) 60 60 60
Length of Bed (mm) 2500) 2500 2500
Min Achievable Residual Unbalance Amount(emar) ≤1g· mm/kg ≤1g· mm/kg ≤1g· mm/kg

Applicable to MEDIUM workpieces

Technical data at a glance PHW-1000H PHW-2000H PHW-3000H PHW-5000H
Mass Scope of Workpiece(kg) 1000 2000 3000 5000
Max Diameter of Workpiece (mm) Φ1600 Φ1800 Φ2100 Φ2400
Distance Between Two Support Bearings (mm) Min 60 Min 60 Min 60 Min 320
Journal Diameter Scope of Workpiece(mm) Φ25~120 (3) Φ25~120 (3) Φ25~120 (3) Φ40~380 (3)
Max Distance between Driving Flange and Right Bearing Support (mm) 1600 1900 1900 2500
Rotational Speed of the Main Axis(r/min) 600,1095 (4) 485,818 (4) 133,225,396.634,970 (4) 192,325,571,915,1400 (4)
Motor Power (kw) 4 (1) 7.5 (1) 7.5 (1) 15 (1)
Torque of Universal Joint Shaft(N·m) 250 300 700 1250
Length of Bed (mm) 2500) 3000 3000 4000
Min Achievable Residual Unbalance Amount(emar) ≤1g· mm/kg ≤1g· mm/kg ≤1g· mm/kg ≤1g· mm/kg

Applicable to LARGE workpieces

Technical data at a glance PHW-10000H PHW-15000 PHW-20000 PHW-30000
Mass Scope of Workpiece(kg) 10000 15000 20000 30000
Max Diameter of Workpiece (mm) Φ2400 Φ2800 Φ2800 Φ3000
Distance Between Two Support Bearings (mm) Min 320 Min 450 Min 450 Min 500
Journal Diameter Scope of Workpiece(mm) Φ60~400 Φ60~400 Φ60~400 Φ80~500
Max Distance between Driving Flange and Right Bearing Support (mm) 4000 4200 5200 6000
Rotational Speed of the Main Axis(r/min) Stepless speed regulation 195,336,561, 916,1374 (4) 195,336,561, 916,1374 (4) 127,218,365, 596,895,1104 (4)
Motor Power (kw) 22 (1) 30 (1) 55 (1) 75 (1)
Torque of Universal Joint Shaft(N·m) 2250 2250 5000 7800
Length of Bed (mm) 5500) 6000 7000 8000
Min Achievable Residual Unbalance Amount(emar) ≤2g· mm/kg ≤2g· mm/kg ≤2g· mm/kg ≤2g· mm/kg

(1) Frequency conversion

(2) Can add to 75-180

(3) Can add to 120~24

(4) Stepless speed regulation